Power Tools
Brand: AIRCRAFT
MPN: AT0016-17
AirCraft AT0016-17 Front Bearing For Air Ratchet Wrench
At a Glance: Replacement front ball bearing for the AirCraft AT0016 air ratchet—supports the drive end for smooth, low-friction running.
A front bearing is one of those parts you only notice when it starts complaining—noise, vibration, roughness, or a tool that just doesn’t feel as smooth under load. The AirCraft AT0016-17 Front Bearing is a precision replacement bearing for the AirCraft Air Ratchet Wrench (AT0016 series), supportin..
N$ 48.76
Ex VAT:N$ 42.40
Brand: AIRCRAFT
MPN: AT0015-17
AirCraft Front Bearing for Air Ratchet Wrench 3/8" (AT0015-17) for Model AT0015
At a Glance: Genuine front bearing spare part for the AirCraft AT0015 3/8" air ratchet wrench—supports stable rotation and smooth motor/drive operation.
The AirCraft AT0015-17 front bearing is a critical support component in the AT0015 3/8" air ratchet wrench, helping the rotating assembly run true and smoothly at the front end of the motor/drive system. When a bearing starts to fail, the signs usually arrive as ex..
N$ 48.76
Ex VAT:N$ 42.40
Brand: AIRCRAFT
MPN: AT0017-32
AirCraft Front Cover for Air Die Grinder 6mm Mini (AT0017-32)
At a Glance: Replacement front cover for the AirCraft AT0017 6mm Mini Air Die Grinder—protects the front assembly and helps keep parts seated and tidy.
The AirCraft AT0017-32 Front Cover is the protective cap that fits over the front end of the AT0017 6mm Mini Air Die Grinder. It helps shield the front assembly from dust and workshop debris, while also giving the tool a cleaner, more finished feel in the hand.
If your..
N$ 7.82
Ex VAT:N$ 6.80
Brand: AIRCRAFT
MPN: AT0017-27
AirCraft Front Plate for Air Die Grinder 6mm Mini (AT0017-27)
At a Glance: Replacement front plate for the AirCraft AT0017 6mm Mini Air Die Grinder—supports internal motor alignment and stable high-speed rotation.
The AirCraft AT0017-27 Front Plate is a precision internal component used in the pneumatic motor assembly of the AT0017 6mm Mini Air Die Grinder. Together with the cylinder, rotor, and rear plate, the front plate helps define correct spacing and support so the motor can spi..
N$ 40.71
Ex VAT:N$ 35.40
Brand: AIRCRAFT
MPN: AT0016-16
AirCraft AT0016-16 Front Plate For Air Ratchet Wrench
At a Glance: Replacement front/end plate that helps keep the AirCraft AT0016 air ratchet motor aligned for smooth, efficient running.
The front plate is one of the precision “bookends” of your air ratchet’s motor—supporting rotating parts and keeping everything running true. The AirCraft AT0016-16 Front Plate is a replacement end plate for the AirCraft Air Ratchet Wrench (AT0016 series). If a plate becomes worn, scored or damaged, it ..
N$ 85.33
Ex VAT:N$ 74.20
Brand: MILES
MPN: MILSTAP8-14
Miles™ 18 Gauge Brad Nails T14
14 mm Brad Nail
Cat no: MILSTAP8-14
Description
Specification
Type
Galvanised
Gauge
18 Ga
Leg Length
14 mm
Brads Per Strip
50
Box Packing
1000 Brad Nails
WARNING:
Always wear safety goggles when using staplers and sharp tools.
Keep out of reach of children!....
N$ 48.07
Ex VAT:N$ 41.80
Brand: MILES
MPN: MILSTAP9-14
Miles™ 18 Ga Headless Pins 14 mm
14 mm Headless Pin
Cat no: MILSTAP9-14
Description
Specification
Type
Galvanised
Gauge
18 Ga
Leg Length
14 mm
Pins Per Strip
50
Box Packing
1000 Pin Nails
WARNING:
Always wear safety goggles when using staplers and sharp tools.
Keep out of reach of children!....
N$ 42.09
Ex VAT:N$ 36.60
Brand: AIRCRAFT
MPN: AT0019-SK02
AirCraft Gasket, Piston & O-ring Kit (6-12) For AT0019 (AT0019-SK02)
At a Glance: Seal-and-piston service kit (Parts 6–12) for the AirCraft AT0019—designed to restore compression, reduce air leaks and bring back crisp cycling.
Inside every pneumatic stapler is a fast-moving piston that relies on tight seals to build pressure and deliver a clean, confident drive. When gaskets and O-rings wear, you’ll usually notice air leaks, weak power, inconsistent firing, or a tool that feels “lazy” betw..
N$ 132.83
Ex VAT:N$ 115.50
Brand: AIRCRAFT
MPN: AT0016-23
AirCraft AT0016-23 Gear Bracket For Air Ratchet Wrench
At a Glance: Replacement gear bracket/carrier that supports and locates the gears for smooth engagement in the AirCraft AT0016 air ratchet.
This part is the “gear organiser” inside your air ratchet—holding gear pins in position so the drivetrain can do its job smoothly under load. The AirCraft AT0016-23 Gear Bracket is a replacement gear carrier/bracket for the AirCraft Air Ratchet Wrench (AT0016 series). It supports the gear set (of..
N$ 82.57
Ex VAT:N$ 71.80
Brand: AIRCRAFT
MPN: AT0016-21
AirCraft AT0016-21 Gear For Air Ratchet Wrench
At a Glance: Replacement gear set (multiple gears) for the AirCraft AT0016 air ratchet—keeps the drive smooth and the torque transfer consistent.
Inside an air ratchet, gears do the serious work—multiplying torque, controlling speed, and making sure the drive feels strong and steady. The AirCraft AT0016-21 Gear is a replacement gear set for the AirCraft Air Ratchet Wrench (AT0016 series). If gears become worn, chipped, or develop excess play..
N$ 3.91
Ex VAT:N$ 3.40
Brand: AIRCRAFT
MPN: AT0016-19
AirCraft AT0016-19 Gear Sleeve For Air Ratchet Wrench
At a Glance: Replacement internally splined gear sleeve that supports positive drive engagement and smooth torque transfer in the AirCraft AT0016 air ratchet.
This is the part that quietly makes “power transfer” happen. The AirCraft AT0016-19 Gear Sleeve is a replacement internally splined sleeve used in the AirCraft Air Ratchet Wrench (AT0016 series) gear/drive assembly. Its internal splines provide a positive mechanical interface th..
N$ 82.57
Ex VAT:N$ 71.80
Brand: AIRCRAFT
MPN: AT0013-41
AirCraft Governors For The AT0013 Air Angle Grinder 125mm Proline (AT0013-41)
At a Glance: Replacement governor assembly that helps control and stabilise running speed on the AT0013 Proline pneumatic grinder.
A pneumatic grinder that over-speeds or runs inconsistently isn’t just annoying—it can be unsafe and hard on consumables. The AirCraft AT0013-41 Governors is a replacement governor assembly for the AirCraft AT0013 125mm Proline air angle grinder. The governor plays a critical role in regu..
N$ 258.18
Ex VAT:N$ 224.50